1. Technical indicators
| Product model | G6-1500 | G6-3000 |
| Drive power | 600-1500W | 1800-3000W |
| working frequency | 17-200KHZ | 17-40KHZ |
| Output current MAX | 5.0A | 8.0A |
| power control | 0-100% CNC adjustable | |
| working voltage | AC220V ± 10% 50HZ | |
| Timing function | 0-9999 seconds adjustable | |
| ambient temperature | 0-40 ℃ | |
| relative humidity | 40% -90% | |
| Product weight | 6.5kg | |
| Product size | Length 380m * Width 90mm * Height 220mm | |
Attention: Ultrasonic power supply is strictly prohibited from operating for a long time beyond the rated current state.
2. Panel diagram
| ① | Alarm output: Fault alarm output indicator light |
| ② | Upper limit alarm: Current upper limit alarm indicator light |
| ③ | Lower limit alarm: Current lower limit alarm indicator light |
| ④ | Overheat protection: Overheat indicator light, ≥ 70 ℃ protection |
| ⑤ | Heating indicator: Heating work indicator light, flashing heating in progress |
| ⑥ | F4: F4 band indicator light (optional) |
| ⑦ | F3: F3 frequency band indicator light (optional) |
| ⑧ | F2: F2 frequency band indicator light (optional) |
| ⑨ | F1: F1 frequency band indicator light |
| ⑩ | Power indicator bar: Power indicator percentage |
| 11 | Display window A: Display frequency or working status |
| 12 | B display window: display current |
| 13 | C display window: displays timed or cumulative time |
| 14 | P+key: power plus (numerical plus) |
| 15 | P-key: Power decrease (numerical decrease) |
| 16 | T+key: Time plus (left shift, internal temperature display) |
| 17 | T-key: Time decrease (move right) |
| 18 | F key: Multi frequency switching (optional) |
| 19 | HEAT key: heating start/stop (optional) |
| 20 | ON/OFF key: ultrasound start/stop (setting) |
| 21 | SWEEP key: frequency sweep switch (set, confirm) |
| 22 | POWER: Main power switch |
Note: The contents in parentheses above are functions or optional options in the set state, and some key functions need to be combined.
3. Precautions for use
5.1 Confirm why the power supply voltage meets the rated operating voltage of the machine The working voltage of the ultrasonic power supply is generally AC220V If an input voltage that does not meet the requirements is connected, it may cause damage to the accessories and cause the ultrasonic power supply to malfunction
5.2 Pay attention to checking which frequency values of the ultrasonic power supply and the observer are consistent, to avoid damage to the ultrasonic power supply, observer, or abnormal debugging situations
5.3 It is strictly prohibited to turn on ultrasonic without water in the sink to avoid damaging the ultrasonic power supply or vibration (transmitter)
5.4During the debugging process, it is important to turn off the power switch to prevent electric shock
5.5 Please place the ultrasonic power supply in a ventilated and dry place
5.6During installation, the bottom of the ultrasonic power supply should avoid construction, and the distance between the back and the construction should be greater than 30cm to facility heat distribution
5.7During installation, the protective ground wire of the ultrasonic power supply must be well grounded to avoid the risk of electric shock
5.8 It is strictly prohibited to operate the ultrasonic power supply with wet hands to prevent electric shock
4.Attached diagram
5. Installation dimensions
Product dimensions: length 380m * width 90mm * height 220mm
Front panel size: 262mm long * 130mm wide * 2.0mm thick (installation size: 242mm long * 100mm wide)
Copyright © 2023. Zhangjiagang DigWell Technology Co., Ltd All rights reserved.wangluocloud.com
