1、 Performance Introduction

Adopting advanced microcomputer control technology and a new circuit design concept, a new generation of multifunctional ultrasonic cleaning machine dedicated power source has been launched:
（1） The control box adopts a fully digital design and key controlled frequency adjustment to achieve higher frequency accuracy.
（2） Unique constant current function ensures constant output regardless of load changes.
（3） The digital ultrasound power is continuously adjustable, making it more flexible to use, with stronger power and higher efficiency.
（4） And it has real-time temperature detection function, which can monitor the working temperature of the equipment in real time.
（5） Equipped with comprehensive protection functions: overheat protection and overcurrent protection, making the operation more reliable.
（6） A four digit timer with precise time control to the second, ensuring the quality of your work.
（7） Three screen display, capable of simultaneously displaying three parameters such as frequency, current, and time.
（8） Provide external control interfaces for easy connection with other control devices.

2、 Main technical indicators

Working current: Please note that the device cannot operate for a long time in a state greater than the rated current.

3、 Panel Function Description

① Power indicator bar: displays the percentage of power size.

② Display window: used to display the working status and fault situation of frequency value, current value, timing time, etc.

③ SWEEP key: Switch the frequency sweep working status (setting and confirmation keys).

④ P+key: Increase output power (flip back and increase numerical value).

⑤ T+key: Increase the timed working value (remote mode setting, left movement, and temperature display).

⑥ P-key: Reduce output power (flip forward and decrease numerical value).

⑦ START/STOP key: Switch between start or stop working status (set and confirm keys).

⑧ T-key: Reduce the timed working value (move to the right).

⑨ Power switch: Power control switch.

Note: The content in parentheses above refers to the functions in the set state, and some key functions need to be combined. The usage method is as follows:

1.Remote mode setting method: With the power off, hold down the “T+” button and turn on the power switch at the same time. After holding it for 2 seconds, release the button and it should display “OFF” as remote control mode.

4、 Precautions

Please place the machine in a dry and ventilated area, with the rear of the machine being more than 30mm away from the obstruction, in order to dissipate heat. Please contact maintenance personnel in case of work abnormalities and do not open the cover casually to avoid danger.

The power protection ground wire of the chassis must be well grounded to avoid the risk of accidental electric shock.